Printables · package 0.1.0
Print LeKiwi
Every part to print or fabricate, with its material, process and the upstream file. Print them yourself, or send the same files to a print service and ask for a quote.
- Printed parts
- 18
- Entries
- 14
- Filament (stated)
- not stated
- Printer time
- ≈ 34 h
- Processes
- FDM · 18
- Minimum printer (stated)
- not stated in the package
Fit (stated minimum)min. bed not stated
Plates on this bed—Needs grams per part; the package has none.
By material
- PLA18 parts
Printer time: ≈ 34 h (stated in the steps). 18 printed parts carry neither grams nor hours.
All entries
| Part | Process · material | Qty | h / part | g / part | Files |
|---|---|---|---|---|---|
| Base plate bottom (base_plate_layer1.stl)printed.base-plate-bottom | FDMPLA | 1 | — | — | STL · github.comprofile: PLA; 0.2 mm layers; 15% infill; 150 mm/s; auto-o |
| Base plate top (base_plate_layer2.stl)printed.base-plate-top | FDMPLA | 1 | — | — | STL · github.comprofile: PLA; 0.2 mm layers; 15% infill; 150 mm/s; auto-o |
| Drive motor mount (drive_motor_mount_v2.stl)printed.drive-motor-mount | FDMPLA | 3 | — | — | STL · github.comprofile: PLA; 0.2 mm layers; 15% infill; 150 mm/s; auto-o |
| Servo wheel hub (servo_wheel_hub.stl, modified VEX VersaHub)printed.servo-wheel-hub | FDMPLA | 3 | — | — | STL · github.comprofile: PLA; 0.2 mm layers; 15% infill; 150 mm/s; auto-o |
| Servo controller mount (servo_controller_mount.stl)printed.servo-controller-mount | FDMPLA | 1 | — | — | STL · github.comprofile: PLA; 0.2 mm layers; 15% infill; 150 mm/s; auto-o |
| 5 V power bank holder (5v_specific/5v_power_bank_holder.stl); 12 V builds print battery_mount.stl or battery_mount_eu.stl insteadprinted.power-mount | FDMPLA | 1 | — | — | STL · github.comprofile: PLA; 0.2 mm layers; 15% infill; 150 mm/s; auto-o |
| Raspberry Pi 5 case top (pi_case_top.stl)printed.pi-case-top | FDMPLA | 1 | — | — | STL · github.comprofile: PLA; 0.2 mm layers; 15% infill; 150 mm/s; auto-o |
| Raspberry Pi 5 case bottom (pi_case_bottom.stl)printed.pi-case-bottom | FDMPLA | 1 | — | — | STL · github.comprofile: PLA; 0.2 mm layers; 15% infill; 150 mm/s; auto-o |
| Webcam base mount (webcam_mount/webcam_mount.stl); Arducam builds use base_camera_mount.stlprinted.webcam-base-mount | FDMPLA | 1 | — | — | STL · github.comprofile: PLA; 0.2 mm layers; 15% infill; 150 mm/s; auto-o |
| Gripper with M3 nut insert for the wrist webcam (webcam_mount/so100_gripper_cam_mount_insert.stl)printed.webcam-gripper-insert | FDMPLA | 1 | — | — | STL · github.comprofile: PLA; 0.2 mm layers; 15% infill; 150 mm/s; auto-o |
| Webcam wrist mount (webcam_mount/webcam_mount_wrist.stl); Arducam builds use wrist_camera_mount.stlprinted.webcam-wrist-mount | FDMPLA | 1 | — | — | STL · github.comprofile: PLA; 0.2 mm layers; 15% infill; 150 mm/s; auto-o |
| Modified follower arm base (modified_base_arm.stl), optional but recommended if you have not built an SO-100/101 yetprinted.modified-arm-base | FDMPLA | 1 | — | — | STL · github.comprofile: PLA; 0.2 mm layers; 15% infill; 150 mm/s; auto-o |
| SO-101 follower arm parts (SO-ARM100 STL/SO101 follower plate)printed.so101-follower | FDMPLA+ (per SO-ARM100) | 1 | — | — | folder · github.comprofile: SO-ARM100 settings: 0.2 mm layers, 15% infill, s |
| SO-101 leader arm parts (SO-ARM100 STL/SO101 leader plate)printed.so101-leader | FDMPLA+ (per SO-ARM100) | 1 | — | — | folder · github.comprofile: SO-ARM100 settings: 0.2 mm layers, 15% infill, s |
Using a print service
- Download the files from the linked folders (the maker’s repo, under its licence).
- Send them with the material per part from the table above; ask for the wall and infill settings the package gives.
- Compare the quote against printing at home: filament mass is not stated.
We have no print-service partners and show no service prices.
Upstream files
File links are per part in the table above.
Hardware licence: Apache-2.0