Printables · package 0.1.0
Print Pupper v3
Every part to print or fabricate, with its material, process and the upstream file. Print them yourself, or send the same files to a print service and ask for a quote.
- Printed parts
- 29
- Entries
- 19
- Filament (stated)
- not stated
- Printer time
- not stated
- Processes
- FDM · 29Laser · 1
- Minimum printer (stated)
- not stated in the package
Fit (stated minimum)min. bed not stated
Plates on this bed—Needs grams per part; the package has none.
By material
- PETG28 parts
- TPU1 parts
- Steel1 parts
Printer time: not stated. 29 printed parts carry neither grams nor hours.
All entries
| Part | Process · material | Qty | h / part | g / part | Files |
|---|---|---|---|---|---|
| Upper body (top half.stl)printed.upper-body | FDMPETG | 1 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| Lower body (bottom half.stl)printed.lower-body | FDMPETG | 1 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| Brain bracket (brain.stl)printed.brain-bracket | FDMPETG | 1 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| Power distribution board cover (top tray.stl)printed.pdb-cover | FDMPETG | 1 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| Ear, right (skinny_ear_right.stl)printed.ear-rh | FDMPETG | 1 | — | — | source · drive.google.comprofile: PETG, 10% infill, 2 walls, 0.3 mm layers, 0.6 mm |
| Ear, left (skinny_ear_left.stl)printed.ear-lh | FDMPETG | 1 | — | — | source · drive.google.comprofile: PETG, 10% infill, 2 walls, 0.3 mm layers, 0.6 mm |
| Front cable clamp, RH and LH (front_cable_clamp.stl)printed.front-clamp | FDMPETG | 1 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| Back cable clamp (back_clamp.stl)printed.back-clamp | FDMPETG | 2 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| Strap / handle (strap.stl)printed.strap | FDMTPU | 1 | — | — | source · drive.google.comprofile: TPU, 100% infill, 20 walls, 0.3 mm layers, 0.6 m |
| Lower leg, right (lower_leg_right.stl)printed.lower-leg-rh | FDMPETG | 2 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| Lower leg, left (lower_leg_left.stl)printed.lower-leg-lh | FDMPETG | 2 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| Upper leg, right (thigh_right.stl)printed.thigh-rh | FDMPETG | 2 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| Upper leg, left (thigh_left.stl)printed.thigh-lh | FDMPETG | 2 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| Upper leg motor bracket / leg cable cover, RH and LH (upper_leg_bracket.stl)printed.upper-leg-bracket | FDMPETG | 2 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| Hip shroud / joint cover, RH and LH (shroud.stl)printed.hip-shroud | FDMPETG | 4 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| Hip (abduction) bracket, right (hip_bracket_shroud_right.stl)printed.hip-bracket-rh | FDMPETG | 2 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| Hip (abduction) bracket, left (hip_bracket_shroud_left.stl)printed.hip-bracket-lh | FDMPETG | 2 | — | — | source · drive.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| [Optional] Standprinted.stand | FDMPETG | 1 | — | — | source · docs.google.comprofile: PETG, 15% infill, 3 walls, 0.3 mm layers, 0.6 mm |
| [Optional] Stand base plate (stand_base.dxf), BOM ~$80 via SendCutSendsheet.stand-base | LaserStainless steel 304, 0.125 in | 1 | — | — | source · drive.google.comprofile: SendCutSend: 0.125 in SS304, tap M3x0.5 on the s |
Using a print service
- Download the files from the linked folders (the maker’s repo, under its licence).
- Send them with the material per part from the table above; ask for the wall and infill settings the package gives.
- Compare the quote against printing at home: filament mass is not stated.
We have no print-service partners and show no service prices.
Not printable: 1 Laser parts go to a machining or cutting service.
Upstream files
File links are per part in the table above.