Printables · package 0.1.0
Print Fourier N1
Every part to print or fabricate, with its material, process and the upstream file. Print them yourself, or send the same files to a print service and ask for a quote.
- Printed parts
- 0
- Entries
- 9
- Filament (stated)
- not stated
- Printer time
- not stated
- Processes
- CNC · 100
- Minimum printer (stated)
- not stated in the package
Fit (stated minimum)min. bed not stated
Plates on this bed—Needs grams per part; the package has none.
By material
- Aluminium100 parts
Printer time: not stated.
All entries
| Part | Process · material | Qty | h / part | g / part | Files |
|---|---|---|---|---|---|
| Head (T5M-01): head upper shell, head, camera bracket. Head also shipped as a 129 MB STLcnc.head | CNCNot read (EBOM/drawings need a Baidu login). Launch press: body is aluminium alloy + engineering plastic composite; process per part unverified | 3 | — | — | source · pan.baidu.com |
| Torso / battery bay (T5M-02 + T5-02 + misc): battery shell, battery latch, dust meshes (3 variants), light pipes, chest, chest front shell, power insulation plate, key and e-stop bracketscnc.torso | CNCNot read (EBOM/drawings need a Baidu login). Launch press: body is aluminium alloy + engineering plastic composite; process per part unverified | 18 | — | — | source · pan.baidu.com |
| Left arm (T5M-03): J2 mount-L, upper arm-L, elbow-Lcnc.arm-left | CNCNot read (EBOM/drawings need a Baidu login). Launch press: body is aluminium alloy + engineering plastic composite; process per part unverified | 3 | — | — | source · pan.baidu.com |
| Right arm and shared arm parts (T5M-04): J1 mount, bearing seat, J2 mount-R, J5 mount-LR, shoulder-R, upper arm-R, elbow-R, forearm-LR, cover, ball hand, harness clamp, lifting eyecnc.arm-right-shared | CNCNot read (EBOM/drawings need a Baidu login). Launch press: body is aluminium alloy + engineering plastic composite; process per part unverified | 12 | — | — | source · pan.baidu.com |
| Waist and pelvis (T5M-05): hip front/rear frames, waist frame, waist '60' output flange, waist-hip clamp, cable sliders/clamps/cover plates, hip '80' heat-sink cover, hip IMU platecnc.waist-hip | CNCNot read (EBOM/drawings need a Baidu login). Launch press: body is aluminium alloy + engineering plastic composite; process per part unverified | 19 | — | — | source · pan.baidu.com |
| Right leg and shared knee parts (T5M-06): hip-yaw front support-R, right thigh, '6043E' output flange, thigh motor plate, knee linkage/crank/shafts/pins/cover, right shank, right sole support, right footcnc.leg-right-shared | CNCNot read (EBOM/drawings need a Baidu login). Launch press: body is aluminium alloy + engineering plastic composite; process per part unverified | 22 | — | — | source · pan.baidu.com |
| Left leg, hip-yaw housing and ankle linkage (T5M-07): hip-yaw supports, hip-roll limit, custom hip-yaw motor shell, left thigh, left shank, sole support, left foot, ankle upper/lower cranks, long/short rods, rod shaftcnc.leg-left-ankle | CNCNot read (EBOM/drawings need a Baidu login). Launch press: body is aluminium alloy + engineering plastic composite; process per part unverified | 16 | — | — | source · pan.baidu.com |
| Ankle small parts (T5C-07): 45/60 linkage output pins, short-rod shafts, ankle cross shaft, spherical-bearing ringcnc.ankle-small | CNCNot read (EBOM/drawings need a Baidu login). Launch press: body is aluminium alloy + engineering plastic composite; process per part unverified | 6 | — | — | source · pan.baidu.com |
| Hip-yaw zero-calibration tool (T5M-09-001)cnc.tool-hip-zero | CNCNot read (EBOM/drawings need a Baidu login). Launch press: body is aluminium alloy + engineering plastic composite; process per part unverified | 1 | — | — | source · pan.baidu.com |
Using a print service
- Download the files from the linked folders (the maker’s repo, under its licence).
- Send them with the material per part from the table above; ask for the wall and infill settings the package gives.
- Compare the quote against printing at home: filament mass is not stated.
We have no print-service partners and show no service prices.
Not printable: 100 CNC parts go to a machining or cutting service.
Upstream files
File links are per part in the table above.