Printables · package 0.1.0
Print PAROL6
Every part to print or fabricate, with its material, process and the upstream file. Print them yourself, or send the same files to a print service and ask for a quote.
- Printed parts
- 41
- Entries
- 41
- Filament (stated)
- 1.16 kg
- Printer time
- ≈ 98 h
- Processes
- FDM · 41
- Minimum printer (stated)
- not stated in the package
Fit (stated minimum)min. bed not stated
Plates on this bed≈ 6Mass rule of thumb: 200 g per plate at 256 mm, scaled by bed area.
By material
- PETG41 parts · 1,158 g
Printer time: ≈ 98 h. 21 printed parts carry neither grams nor hours.
All entries
| Part | Process · material | Qty | h / part | g / part | Files |
|---|---|---|---|---|---|
| Electronics_case_v1_1printed.electronics-case | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| lid_electronicsprinted.lid-electronics | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| fan_coverprinted.fan-cover | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J1_bottom_lidprinted.j1-bottom-lid | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| main_base_blocker (Main_base in the manual and print table)printed.main-base | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J1_turret_rework_blocker (J1_turret with J1 stopper rails)printed.j1-turret | FDMPETG | 1 | 18 | 210 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J1_turret_motor_holderprinted.j1-turret-motor-holder | FDMPETG | 1 | 6 | 53 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J1_rotation_shaftprinted.j1-rotation-shaft | FDMPETG | 1 | 3.57 | 31 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J1_backplateprinted.j1-backplate | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J1_belt_cover_reworkprinted.j1-belt-cover | FDMPETG | 1 | 2 | 37 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J1_wires_cover_reworkprinted.j1-wires-cover | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J2_limit_switch_coverprinted.j2-limit-switch-cover | FDMPETG | 1 | 0.22 | 3 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J2_stopper_blockprinted.j2-stopper-block | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| Upper_armprinted.upper-arm | FDMPETG | 1 | 18 | 220 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| Upper_arm_coverprinted.upper-arm-cover | FDMPETG | 1 | 2 | 34 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| Upper_arm_wires_coverprinted.upper-arm-wires-cover | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J2_shaftprinted.j2-shaft | FDMPETG | 1 | 4.68 | 43 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J2_coverprinted.j2-cover | FDMPETG | 1 | 0.7 | 10 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J2_bearing_backplateprinted.j2-bearing-backplate | FDMPETG | 1 | 0.7 | 10 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J3_limit_switch_coverprinted.j3-limit-switch-cover | FDMPETG | 1 | 0.35 | 4 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| 38_pulley_J3 (J3 output pulley)printed.pulley-38-j3 | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| 42_pulley (J3 input pulley on the gearbox shaft coupler)printed.pulley-42 | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| Elbow_partprinted.elbow-part | FDMPETG | 1 | 16 | 215 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| Elbow_lid_1printed.elbow-lid-1 | FDMPETG | 1 | 1.77 | 20 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| Elbow_lid_2printed.elbow-lid-2 | FDMPETG | 1 | 0.25 | 4 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J4_bearing_backplateprinted.j4-bearing-backplate | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J4_limiterprinted.j4-limiter | FDMPETG | 1 | — | 1 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J5_part (forearm body)printed.j5-part | FDMPETG | 1 | 10 | 114 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J5_belt_lidprinted.j5-belt-lid | FDMPETG | 1 | — | 20 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J5_electronics_lidprinted.j5-electronics-lid | FDMPETG | 1 | — | 20 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| HTD3_48_J5_pulley (48 tooth J5 output pulley)printed.htd3-48-j5-pulley | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| J4_output_pulleyprinted.j4-output-pulley | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| wrist (J6 housing)printed.wrist | FDMPETG | 1 | 7.85 | 77.65 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| Pneumatic_gripper_holderprinted.pneumatic-gripper-holder | FDMPETG | 1 | 2.87 | 31 | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| Gripper_ARMS (jaws for the pneumatic gripper; print count not stated)printed.gripper-arms | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| vacuum_gripper_holder (optional vacuum gripper)printed.vacuum-gripper-holder | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| ESTOP_TOPprinted.estop-top | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| ESTOP_BOTTOMprinted.estop-bottom | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| connectors_4_alu_profiles (optional 30x30 profile base; needs M5 T-nuts and M5 screws)printed.alu-profile-connector | FDMPETG | 1 | — | — | folder · github.comprofile: PETG, 0.2 mm layers, honeycomb infill, 3 perimet |
| Upper_arm_A_long_end + Upper_arm_B_short_end (replaces Upper_arm on beds under ~175 mm)printed.small-bed-upper-arm | FDMPETG | 1 | — | — | folder · github.comprofile: Optional two-piece replacement joined with 6x22 |
| J1_turret_rework_blocker_A_turret_end + _B_arm_end (replaces J1 turret on small beds)printed.small-bed-j1-turret | FDMPETG | 1 | — | — | folder · github.comprofile: Optional two-piece replacement joined with 4x18 |
Using a print service
- Download the files from the linked folders (the maker’s repo, under its licence).
- Send them with the material per part from the table above; ask for the wall and infill settings the package gives.
- Compare the quote against printing at home: 1.16 kg of filament and about 98 h of printer time.
We have no print-service partners and show no service prices.
Upstream files
File links are per part in the table above.
Hardware licence: GPL-3.0