Printables · package 0.2.0
Print Dropbear
Every part to print or fabricate, with its material, process and the upstream file. Print them yourself, or send the same files to a print service and ask for a quote.
- Printed parts
- 296
- Entries
- 256
- Filament (stated)
- 11.56 kg
- Printer time
- 460 h
- Processes
- FDM · 296
- Minimum printer (stated)
- 220 × 220 × 250 mm
Fit (stated minimum)fitsneeds 220×220×250“FDM printer, 220x220x250 mm minimum (validated on a Bambu Lab P1S)”
Plates on this bed≈ 58Mass rule of thumb: 200 g per plate at 256 mm, scaled by bed area.
By material
- PLA294 parts · 11,556 g
- TPU2 parts
Printer time: 460 h. 2 printed parts carry neither grams nor hours.
All entries
| Part | Process · material | Qty | h / part | g / part | Files |
|---|---|---|---|---|---|
| Head: base-stepper-mountprinted.head.base-stepper-mount | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 3 | 1.53 | 36.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: center-bracket2printed.head.center-bracket2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 3 | 1.37 | 32.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: realsense 2printed.head.realsense-2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.96 | 22.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: Screw_cylinder v3printed.head.screw-cylinder-v3 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 6 | 0.64 | 15.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: neck-driver-mountprinted.head.neck-driver-mount | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.07 | 52.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: neck-stack-secondaryprinted.head.neck-stack-secondary | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.92 | 74 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: inner-antenna-holderprinted.head.inner-antenna-holder | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.34 | 8.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: Head v12_new-neck v2printed.head.head-v12-new-neck-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 3.83 | 79.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: spidar_10mm v7printed.head.spidar-10mm-v7 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 6 | 0.27 | 5.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: spidar_8mm v6printed.head.spidar-8mm-v6 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 6 | 0.3 | 6.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: rear-baseprinted.head.rear-base | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 8.48 | 199.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: front-plateprinted.head.front-plate | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 3.89 | 91.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: neck-backprinted.head.neck-back | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 4.03 | 115.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: mouth2printed.head.mouth2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.2 | 62.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: center-bracketprinted.head.center-bracket | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.87 | 82 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: temple2printed.head.temple2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 10.79 | 241.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: realsense-bracketprinted.head.realsense-bracket | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.73 | 60.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: GPIO_Rail_AGXprinted.head.gpio-rail-agx | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.74 | 73.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Head: base-coverprinted.head.base-cover | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 3.29 | 88.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: neck-chest-interface2printed.torso.neck-chest-interface2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 6.1 | 129.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: Front_mid_left_rib v2printed.torso.front-mid-left-rib-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.1 | 23.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: Front_mid_right_rib v2printed.torso.front-mid-right-rib-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.1 | 23.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: back_left_splinesupport v3printed.torso.back-left-splinesupport-v3 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.1 | 44.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: back_right_splinesupport v4printed.torso.back-right-splinesupport-v4 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.1 | 44.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: handle (1)printed.torso.handle-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 5.23 | 122 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: handleprinted.torso.handle | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 5.23 | 122 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: left_rmd_x10mount v2printed.torso.left-rmd-x10mount-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.99 | 69.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: right_rmdx10mount v2printed.torso.right-rmdx10mount-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.99 | 69.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: HumanoidTorso_left-front-rib-lower v4printed.torso.humanoidtorso-left-front-rib-lower-v4 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.33 | 50.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: HumanoidTorso_Right-front-rib-lower_Component2 v1printed.torso.humanoidtorso-right-front-rib-lower-component2-v1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.33 | 50.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: Torso_ug_front-Left-shoulder_Component2 v1printed.torso.torso-ug-front-left-shoulder-component2-v1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.58 | 56.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: Torso_ug_front-right-shoulder v5printed.torso.torso-ug-front-right-shoulder-v5 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.58 | 56.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: Left_back_shoulder v5printed.torso.left-back-shoulder-v5 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.68 | 58.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: Right_back_shoulder v11printed.torso.right-back-shoulder-v11 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.62 | 57.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: killswitch-spine-interfaceprinted.torso.killswitch-spine-interface | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.62 | 35.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: button-holderprinted.torso.button-holder | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.64 | 14 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: back_lower_rightrib v2printed.torso.back-lower-rightrib-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.6 | 34 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: back_lower_leftrib v2printed.torso.back-lower-leftrib-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.6 | 34 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: right_battery_mount v3printed.torso.right-battery-mount-v3 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 4.5 | 95.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: left_battery_mount v2printed.torso.left-battery-mount-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 4.5 | 95.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: battery-monitor-holderprinted.torso.battery-monitor-holder | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.62 | 13.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: 6band (1) v1printed.torso.6band-1-v1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 0.8 | 16.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: Back_middle_Strap v5printed.torso.back-middle-strap-v5 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 3.99 | 79.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: Front_middle_Strap v4printed.torso.front-middle-strap-v4 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 3.94 | 78.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: rear-right-shoulder_MIRprinted.torso.rear-right-shoulder-mir | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.91 | 39.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: rear-right-shoulderprinted.torso.rear-right-shoulder | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.91 | 39.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: HumanoidTorso_lumbar-strap v1printed.torso.humanoidtorso-lumbar-strap-v1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 3.08 | 63.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: HumanoidTorso_naval-strap (1) v1printed.torso.humanoidtorso-naval-strap-1-v1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.87 | 38.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Torso: head-power-supply-bracketprinted.torso.head-power-supply-bracket | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.64 | 13.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_CEMmount_front_Topprinted.pelvic-girdle.hip-cemmount-front-top | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 6.45 | 168.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: lumbareprinted.pelvic-girdle.lumbare | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 3.28 | 85.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_CEMmount_front_downprinted.pelvic-girdle.hip-cemmount-front-down | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 6.42 | 167.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: HumanoidPelvicGirdle v11_naval (1) v2printed.pelvic-girdle.humanoidpelvicgirdle-v11-naval-1-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.66 | 43.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Component2printed.pelvic-girdle.component2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.04 | 28.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Component2(Mirror)printed.pelvic-girdle.component2-mirror | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.04 | 28.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Lumbar Mountsprinted.pelvic-girdle.lumbar-mounts | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 11.04 | 299 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_rmd_spacer2printed.pelvic-girdle.hip-rmd-spacer2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.8 | 21.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_rmd_spacer1printed.pelvic-girdle.hip-rmd-spacer1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.8 | 21.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_profilelock2printed.pelvic-girdle.hip-profilelock2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.32 | 8.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_profilelock1printed.pelvic-girdle.hip-profilelock1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.32 | 8.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_rmdmount2printed.pelvic-girdle.hip-rmdmount2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.54 | 14.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_rmd_mount4printed.pelvic-girdle.hip-rmd-mount4 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.54 | 14.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_rmdmount3printed.pelvic-girdle.hip-rmdmount3 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.54 | 14.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_rmdmount1printed.pelvic-girdle.hip-rmdmount1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.54 | 14.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Groin_frontprinted.pelvic-girdle.groin-front | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.56 | 15.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: butt_centr1printed.pelvic-girdle.butt-centr1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.13 | 30.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Bearing_holder2printed.pelvic-girdle.bearing-holder2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.78 | 21.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: HumanoidPelvicGirdle v11_hips-front-mount v2printed.pelvic-girdle.humanoidpelvicgirdle-v11-hips-front-mount-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.54 | 14.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Groin centreprinted.pelvic-girdle.groin-centre | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.51 | 13.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: HumanoidPelvicGirdle v11_front-bearing-strap (1) v2printed.pelvic-girdle.humanoidpelvicgirdle-v11-front-bearing-strap-1-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.62 | 16.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Butt_centre2printed.pelvic-girdle.butt-centre2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.58 | 15.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Backprinted.pelvic-girdle.back | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 8.48 | 230.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Bearing Holder1printed.pelvic-girdle.bearing-holder1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.78 | 20.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_roll_R2printed.pelvic-girdle.hip-roll-r2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.14 | 56.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_roll_R1printed.pelvic-girdle.hip-roll-r1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.14 | 56.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_roll_L2printed.pelvic-girdle.hip-roll-l2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.14 | 56.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Pelvis: Hip_roll_l1printed.pelvic-girdle.hip-roll-l1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.14 | 56.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: bicep-rotational-cuff-second-motor-bracket(Mirror) (1)printed.left-arm.bicep-rotational-cuff-second-motor-bracket-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.98 | 26.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: yaw-waist-adapter-motor-exal_MIR1 (5)(Mirror) (1)printed.left-arm.yaw-waist-adapter-motor-exal-mir1-5-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.14 | 30.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: yaw-waist-adapter-motor-exal_MIR1(Mirror) (1)printed.left-arm.yaw-waist-adapter-motor-exal-mir1-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.14 | 30.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: shoulder-front(Mirror) (1)printed.left-arm.shoulder-front-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.86 | 23.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: shoulder-cap(Mirror) (1)printed.left-arm.shoulder-cap-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.37 | 36.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: shoulder-front-bearing-adapter(Mirror) (1)printed.left-arm.shoulder-front-bearing-adapter-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.58 | 42.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: elbow-hangar(Mirror) (1)printed.left-arm.elbow-hangar-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.63 | 16.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: elbow-hangar1(Mirror) (1)printed.left-arm.elbow-hangar1-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.63 | 16.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: elbow-bridge-rear (1)(Mirror) (1)printed.left-arm.elbow-bridge-rear-1-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.08 | 2.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: shoulder-roll-al-mot_MIR1 (1)(Mirror) (1)printed.left-arm.shoulder-roll-al-mot-mir1-1-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.42 | 11.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: elbow-bridge-rear(Mirror) (1)printed.left-arm.elbow-bridge-rear-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.09 | 2.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: bicep-shoulder-bracket-exal (1)(Mirror) (1)printed.left-arm.bicep-shoulder-bracket-exal-1-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.35 | 9.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: bicep-shoulder-bracket-exal (2)(Mirror) (1)printed.left-arm.bicep-shoulder-bracket-exal-2-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.35 | 9.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: bicep-shoulder-bracket-exal (3)(Mirror) (1)printed.left-arm.bicep-shoulder-bracket-exal-3-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.35 | 9.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: bicep-shoulder-bracket-exal(Mirror) (1)printed.left-arm.bicep-shoulder-bracket-exal-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.35 | 9.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: shoulder-roll-al-mot_MIR1 (2)(Mirror) (1)printed.left-arm.shoulder-roll-al-mot-mir1-2-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.42 | 11.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: shoulder-roll-al-mot_MIR1 (3)(Mirror) (1)printed.left-arm.shoulder-roll-al-mot-mir1-3-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.42 | 11.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: shoulder-roll-al-mot_MIR1(Mirror) (1)printed.left-arm.shoulder-roll-al-mot-mir1-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.42 | 11.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: straight-tendon(Mirror) (1)printed.left-arm.straight-tendon-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.05 | 27.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: arm-cuff-bicep-bracket(Mirror) (1)printed.left-arm.arm-cuff-bicep-bracket-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.26 | 32.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: bicep-rear-motor-adapter(Mirror) (1)printed.left-arm.bicep-rear-motor-adapter-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.89 | 23.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: shoulder-motor-bicep-rotor-bracket(Mirror) (1)printed.left-arm.shoulder-motor-bicep-rotor-bracket-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.77 | 20 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: forearm-elbow-motor-bracket-inner(Mirror) (1)printed.left-arm.forearm-elbow-motor-bracket-inner-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.61 | 15.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: forearm-elbow-motor-bracket-inner2(Mirror) (1)printed.left-arm.forearm-elbow-motor-bracket-inner2-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.61 | 15.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: second-forearm-motor-strap(Mirror) (1)printed.left-arm.second-forearm-motor-strap-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.42 | 10.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: shoulder-ex-al-interface(Mirror) (1)printed.left-arm.shoulder-ex-al-interface-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.89 | 23.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: elbow-rear-hanger(Mirror) (1)printed.left-arm.elbow-rear-hanger-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.28 | 7.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: shoulder-ex-al-interface (1)(Mirror) (1)printed.left-arm.shoulder-ex-al-interface-1-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.89 | 23.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: shoulder-ex-al-interface (2)(Mirror) (1)printed.left-arm.shoulder-ex-al-interface-2-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.9 | 23.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: elbow-rear-hanger (1)(Mirror) (1)printed.left-arm.elbow-rear-hanger-1-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.28 | 7.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: front-bearing-adapter-shoulder(Mirror) (1)printed.left-arm.front-bearing-adapter-shoulder-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.76 | 19.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: bicep(Mirror) (1)printed.left-arm.bicep-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.15 | 3.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: power-mount-arm(Mirror) (1)printed.left-arm.power-mount-arm-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.29 | 7.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: yaw-cap(Mirror) (1)printed.left-arm.yaw-cap-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.64 | 14.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: multiplex-stack-flat(Mirror) (1)printed.left-arm.multiplex-stack-flat-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.86 | 19.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: top-bracket-servo-strap (1)(Mirror) (1)printed.left-arm.top-bracket-servo-strap-1-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.76 | 17.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: top-bracket-servo-strap(Mirror) (1)printed.left-arm.top-bracket-servo-strap-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.76 | 17.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: fan-mount(Mirror) (1)printed.left-arm.fan-mount-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.28 | 6.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: bicep-motor-mate(Mirror) (1)printed.left-arm.bicep-motor-mate-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.01 | 23.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left arm: fore-arm-bicep-motor-attatch(Mirror) (1)printed.left-arm.fore-arm-bicep-motor-attatch-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.9 | 20.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: bicep-rotational-cuff-second-motor-bracketprinted.right-arm.bicep-rotational-cuff-second-motor-bracket | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.98 | 26.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: yaw-waist-adapter-motor-exal_MIR1printed.right-arm.yaw-waist-adapter-motor-exal-mir1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.14 | 30.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: yaw-waist-adapter-motor-exal_MIR1 (5)printed.right-arm.yaw-waist-adapter-motor-exal-mir1-5 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.14 | 30.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: shoulder-frontprinted.right-arm.shoulder-front | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.87 | 23.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: shoulder-roll-al-mot_MIR1 (3)printed.right-arm.shoulder-roll-al-mot-mir1-3 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.42 | 11.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: shoulder-roll-al-mot_MIR1 (2)printed.right-arm.shoulder-roll-al-mot-mir1-2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.42 | 11.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: shoulder-roll-al-mot_MIR1 (1)printed.right-arm.shoulder-roll-al-mot-mir1-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.42 | 11.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: shoulder-roll-al-mot_MIR1printed.right-arm.shoulder-roll-al-mot-mir1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.42 | 11.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: shoulder-capprinted.right-arm.shoulder-cap | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.37 | 36.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: shoulder-front-bearing-adapterprinted.right-arm.shoulder-front-bearing-adapter | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.58 | 42.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: elbow-hangar1printed.right-arm.elbow-hangar1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.62 | 16.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: elbow-hangarprinted.right-arm.elbow-hangar | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.63 | 16.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: elbow-bridge-rearprinted.right-arm.elbow-bridge-rear | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.09 | 2.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: elbow-bridge-rear (1)printed.right-arm.elbow-bridge-rear-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.08 | 2.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: bicep-shoulder-bracket-exal (1)printed.right-arm.bicep-shoulder-bracket-exal-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.35 | 9.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: bicep-shoulder-bracket-exal (2)printed.right-arm.bicep-shoulder-bracket-exal-2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.35 | 9.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: bicep-shoulder-bracket-exal (3)printed.right-arm.bicep-shoulder-bracket-exal-3 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.35 | 9.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: bicep-shoulder-bracket-exalprinted.right-arm.bicep-shoulder-bracket-exal | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.35 | 9.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: straight-tendonprinted.right-arm.straight-tendon | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.04 | 27.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: arm-cuff-bicep-bracketprinted.right-arm.arm-cuff-bicep-bracket | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.24 | 32.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: bicep-rear-motor-adapterprinted.right-arm.bicep-rear-motor-adapter | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.88 | 23.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: shoulder-motor-bicep-rotor-bracketprinted.right-arm.shoulder-motor-bicep-rotor-bracket | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.76 | 20 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: forearm-elbow-motor-bracket-innerprinted.right-arm.forearm-elbow-motor-bracket-inner | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.61 | 16 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: forearm-elbow-motor-bracket-inner2printed.right-arm.forearm-elbow-motor-bracket-inner2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.6 | 15.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: second-forearm-motor-strapprinted.right-arm.second-forearm-motor-strap | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.42 | 10.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: elbow-rear-hanger (1)printed.right-arm.elbow-rear-hanger-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.28 | 7.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: elbow-rear-hangerprinted.right-arm.elbow-rear-hanger | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.28 | 7.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: shoulder-ex-al-interface (2)printed.right-arm.shoulder-ex-al-interface-2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.89 | 23.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: shoulder-ex-al-interface (1)printed.right-arm.shoulder-ex-al-interface-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.88 | 22.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: shoulder-ex-al-interfaceprinted.right-arm.shoulder-ex-al-interface | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.89 | 23.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: front-bearing-adapter-shoulderprinted.right-arm.front-bearing-adapter-shoulder | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.76 | 20 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: power-mount-armprinted.right-arm.power-mount-arm | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.29 | 7.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: bicepprinted.right-arm.bicep | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.14 | 3.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: multiplex-stack-flatprinted.right-arm.multiplex-stack-flat | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.8 | 19.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: top-bracket-servo-strap (1)printed.right-arm.top-bracket-servo-strap-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.71 | 17 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: top-bracket-servo-strapprinted.right-arm.top-bracket-servo-strap | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.71 | 17 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: fan-mountprinted.right-arm.fan-mount | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.26 | 6.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: bicep-motor-mateprinted.right-arm.bicep-motor-mate | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.95 | 22.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: fore-arm-bicep-motor-attatchprinted.right-arm.fore-arm-bicep-motor-attatch | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.84 | 20.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right arm: yaw-capprinted.right-arm.yaw-cap | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.6 | 14.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: Thigh_BUSH v3printed.left-leg.thigh-bush-v3 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 3.09 | 77.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: HumanoidPelvicGirdle v11_hip-roll-al-mot_MIR2 (1) v2printed.left-leg.humanoidpelvicgirdle-v11-hip-roll-al-mot-mir2-1-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 0.75 | 18.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: left_thigh_connectorprinted.left-leg.left-thigh-connector | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.5 | 12.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: Thigh_Component3 v2printed.left-leg.thigh-component3-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 5.21 | 130.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: Thigh_Component1 v8printed.left-leg.thigh-component1-v8 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 5.06 | 126.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: Thigh_left_cemmountprinted.left-leg.thigh-left-cemmount | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 4.85 | 121.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: basis_leftprinted.left-leg.basis-left | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.89 | 73.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: ankle-thickprinted.left-leg.ankle-thick | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.43 | 61.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: bearingstrap (1)printed.left-leg.bearingstrap-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.02 | 26.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: calf-motor-driver-extprinted.left-leg.calf-motor-driver-ext | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 1.26 | 32.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: heel-topleftprinted.left-leg.heel-topleft | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.93 | 23.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: knee-strap-second-test (1)printed.left-leg.knee-strap-second-test-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.99 | 25.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: heel-top_MIRleftprinted.left-leg.heel-top-mirleft | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.93 | 23.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: knee-strap-second-testprinted.left-leg.knee-strap-second-test | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.99 | 25.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: bearingstrapprinted.left-leg.bearingstrap | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.02 | 26.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: foot-imu-strapprinted.left-leg.foot-imu-strap | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.06 | 1.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: heel-bracket_leftprinted.left-leg.heel-bracket-left | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.37 | 59.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: heel-bracketleftprinted.left-leg.heel-bracketleft | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.27 | 57 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: conjstraint-knee-test-outeprinted.left-leg.conjstraint-knee-test-oute | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.75 | 69.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: conjstraint-knee-test-oute_MIRprinted.left-leg.conjstraint-knee-test-oute-mir | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.77 | 69.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: 6band (5)printed.left-leg.6band-5 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.21 | 30.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: heel-rollerprinted.left-leg.heel-roller | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.11 | 2.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: motor-calf-exal-mountprinted.left-leg.motor-calf-exal-mount | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 4 | 0.44 | 11.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: bearingstrap-inner-thigh(Mirror) (1)printed.left-leg.bearingstrap-inner-thigh-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.07 | 27 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: thigh-bracket(Mirror) (1)printed.left-leg.thigh-bracket-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.61 | 40.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: double-bracketprinted.left-leg.double-bracket | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.77 | 72.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: HumanoidLeftLeg v22 (1)_ankle-side-bracket123 v2printed.left-leg.humanoidleftleg-v22-1-ankle-side-bracket123-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.63 | 16.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: ankle-motor-driver-bracketleftprinted.left-leg.ankle-motor-driver-bracketleft | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.58 | 15.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: ankle-motor-driver-bracket_leftprinted.left-leg.ankle-motor-driver-bracket-left | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.58 | 15.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: calf-lower-bracket_leftprinted.left-leg.calf-lower-bracket-left | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.04 | 27.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: calf-lower-bracketprinted.left-leg.calf-lower-bracket | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.04 | 27.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: ankle-side-bracketprinted.left-leg.ankle-side-bracket | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.63 | 16.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: bearing-sensor-adapterprinted.left-leg.bearing-sensor-adapter | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 0.1 | 2.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: double-bracket-10deg_MIR_MIR_MIR(Mirror) (1)printed.left-leg.double-bracket-10deg-mir-mir-mir-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.91 | 76.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: Toe v1printed.left-leg.toe-v1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 6.23 | 156.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: multiplex-stackprinted.left-leg.multiplex-stack | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.81 | 20.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: calf-skin_flipprinted.left-leg.calf-skin-flip | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.82 | 45.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: bearing-sensor-adapter-armprinted.left-leg.bearing-sensor-adapter-arm | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 0.26 | 6.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: knee-lock-2printed.left-leg.knee-lock-2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.65 | 16.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: calf-skinprinted.left-leg.calf-skin | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.82 | 45.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: knee-lock-2-bprinted.left-leg.knee-lock-2-b | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.65 | 16.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: new-heel-opposingprinted.left-leg.new-heel-opposing | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.69 | 71.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: tie-rod-ankle-brackket_left1printed.left-leg.tie-rod-ankle-brackket-left1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.18 | 58.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: tie-rod-ankle-brackket_leftprinted.left-leg.tie-rod-ankle-brackket-left | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.18 | 58.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: flank(Mirror) (1)printed.left-leg.flank-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.37 | 63.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: flank (1)(Mirror) (1)printed.left-leg.flank-1-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.37 | 63.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: calf-coverprinted.left-leg.calf-cover | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 2.42 | 56.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: flank-front (1)(Mirror) (1)printed.left-leg.flank-front-1-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 3.28 | 120 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: flank-front(Mirror) (1)printed.left-leg.flank-front-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 3.28 | 120 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Left leg: flank-front-flipped(Mirror) (1)printed.left-leg.flank-front-flipped-mirror-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 3.08 | 80.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: CEM60_thigh_Right_Thigh_Component1 v8(Mirror) v1printed.right-leg.cem60-thigh-right-thigh-component1-v8-mirror-v1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 5.05 | 126.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: CEM-right-mountprinted.right-leg.cem-right-mount | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 4.85 | 121.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: Thigh_BUSH v3printed.right-leg.thigh-bush-v3 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 3.08 | 77.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: CEM60_thigh_Left_Thigh_Component3 v2(Mirror) v1printed.right-leg.cem60-thigh-left-thigh-component3-v2-mirror-v1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 5.2 | 130.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: HumanoidPelvicGirdle v11_hip-roll-al-mot_MIR2 (1) v2printed.right-leg.humanoidpelvicgirdle-v11-hip-roll-al-mot-mir2-1-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 0.75 | 18.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: HumanoidLeftLeg_CEM60_Component216_Component2 v1printed.right-leg.humanoidleftleg-cem60-component216-component2-v1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.5 | 12.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: basis_leftprinted.right-leg.basis-left | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.89 | 73.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: ankle-thickprinted.right-leg.ankle-thick | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.43 | 61.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: bearingstrap (1)printed.right-leg.bearingstrap-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.02 | 26 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: calf-motor-driver-extprinted.right-leg.calf-motor-driver-ext | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 1.26 | 32 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: heel-topleftprinted.right-leg.heel-topleft | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.93 | 23.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: knee-strap-second-test (1)printed.right-leg.knee-strap-second-test-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.98 | 25.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: heel-top_MIRleftprinted.right-leg.heel-top-mirleft | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.93 | 23.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: knee-strap-second-testprinted.right-leg.knee-strap-second-test | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.98 | 25.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: bearingstrapprinted.right-leg.bearingstrap | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.02 | 26 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: heel-bracket_leftprinted.right-leg.heel-bracket-left | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.44 | 60.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: heel-bracketleftprinted.right-leg.heel-bracketleft | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.33 | 57.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: conjstraint-knee-test-outeprinted.right-leg.conjstraint-knee-test-oute | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.83 | 70.1 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: conjstraint-knee-test-oute_MIRprinted.right-leg.conjstraint-knee-test-oute-mir | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.85 | 70.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: Thigh bracket v2printed.right-leg.thigh-bracket-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.66 | 41 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: bearingstrap-inner-thighprinted.right-leg.bearingstrap-inner-thigh | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.1 | 27.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: 6band (5)printed.right-leg.6band-5 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.24 | 30.8 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: heel-rollerprinted.right-leg.heel-roller | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.11 | 2.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: motor-calf-exal-mountprinted.right-leg.motor-calf-exal-mount | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 4 | 0.46 | 11.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: double-bracket-10deg_MIR_MIR_MIRprinted.right-leg.double-bracket-10deg-mir-mir-mir | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.91 | 76.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: double-bracketprinted.right-leg.double-bracket | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.77 | 72.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: HumanoidLeftLeg v22 (1)_ankle-side-bracket123 v2printed.right-leg.humanoidleftleg-v22-1-ankle-side-bracket123-v2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.63 | 16.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: ankle-motor-driver-bracketleftprinted.right-leg.ankle-motor-driver-bracketleft | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.58 | 15.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: ankle-motor-driver-bracket_leftprinted.right-leg.ankle-motor-driver-bracket-left | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.58 | 15.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: calf-lower-bracket_leftprinted.right-leg.calf-lower-bracket-left | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.04 | 27.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: calf-lower-bracketprinted.right-leg.calf-lower-bracket | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.04 | 27.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: ankle-side-bracketprinted.right-leg.ankle-side-bracket | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.63 | 16.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: bearing-sensor-adapterprinted.right-leg.bearing-sensor-adapter | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 0.1 | 2.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: Toe v1printed.right-leg.toe-v1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 6.23 | 156.3 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: multiplex-stackprinted.right-leg.multiplex-stack | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.81 | 20.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: calf-skin_flipprinted.right-leg.calf-skin-flip | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.82 | 45.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: bearing-sensor-adapter-armprinted.right-leg.bearing-sensor-adapter-arm | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 0.26 | 6.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: knee-lock-2printed.right-leg.knee-lock-2 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.65 | 16.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: calf-skinprinted.right-leg.calf-skin | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 1.82 | 45.7 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: knee-lock-2-bprinted.right-leg.knee-lock-2-b | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 0.65 | 16.2 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: flankprinted.right-leg.flank | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.3 | 62.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: flank (1)printed.right-leg.flank-1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.3 | 62.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: new-heel-opposingprinted.right-leg.new-heel-opposing | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.61 | 70.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: tie-rod-ankle-brackket_left1printed.right-leg.tie-rod-ankle-brackket-left1 | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.11 | 57.4 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: tie-rod-ankle-brackket_leftprinted.right-leg.tie-rod-ankle-brackket-left | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.12 | 57.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: calf-coverprinted.right-leg.calf-cover | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 2.42 | 56.6 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: flank-frontprinted.right-leg.flank-front | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 2 | 3.26 | 119.9 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Right leg: flank-front-flippedprinted.right-leg.flank-front-flipped | FDMPLA (plates validated in PLA on a Bambu P1S; PETG/ABS preferred, CF-PETG or nylon for leg brackets) | 1 | 2.37 | 72.5 | folder · github.comprofile: Bambu P1S, 0.4 mm nozzle, 0.2 mm layers, 4 walls |
| Feet: foot assembly from foot-v3.stp (TPU 95-98A for the yellow sole parts, PLA for the rest)printed.feet.foot | FDMTPU 95-98A Shore (sole/damping parts) + PLA at >=80% rectilinear infill, >=5 walls, >=5 top/bottom layers | 2 | — | — | source · github.com |
Using a print service
- Download the files from the linked folders (the maker’s repo, under its licence).
- Send them with the material per part from the table above; ask for the wall and infill settings the package gives.
- Compare the quote against printing at home: 11.56 kg of filament and about 460 h of printer time.
We have no print-service partners and show no service prices.
Upstream files
Hardware licence: MIT AND Hyperspawn-License