Printables · package 0.1.0
Print Aero Hand Open
Every part to print or fabricate, with its material, process and the upstream file. Print them yourself, or send the same files to a print service and ask for a quote.
- Printed parts
- 38
- Entries
- 17
- Filament (stated)
- not stated
- Printer time
- not stated
- Processes
- FDM · 38
- Minimum printer (stated)
- 200 × 200 mm
Fit (stated minimum)fitsneeds 200×200“FDM printer, bed >= 200 x 200 mm”
Plates on this bed—Needs grams per part; the package has none.
By material
- PLA38 parts
Printer time: not stated. 38 printed parts carry neither grams nor hours.
All entries
| Part | Process · material | Qty | h / part | g / part | Files |
|---|---|---|---|---|---|
| Finger Base (P/N 1)printed.finger-base | FDMPLA | 4 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Finger MCP (P/N 2)printed.finger-mcp | FDMPLA | 4 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Finger Proximal (P/N 3)printed.finger-proximal | FDMPLA | 4 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Finger Medial (P/N 4)printed.finger-medial | FDMPLA | 4 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Finger Distal (P/N 5)printed.finger-distal | FDMPLA | 4 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Cable Spool (P/N 6)printed.cable-spool | FDMPLA | 6 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Thumb Abduction Upper Servo Disk (P/N 7)printed.thumb-abd-upper-disk | FDMPLA | 1 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Thumb Abduction Lower Servo Disk (P/N 8)printed.thumb-abd-lower-disk | FDMPLA | 1 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Thumb Abduction Linkage Bar (P/N 9)printed.thumb-linkage-bar | FDMPLA | 1 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Thumb CMC Base (P/N 10)printed.thumb-cmc-base | FDMPLA | 1 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Thumb MCP (P/N 11)printed.thumb-mcp | FDMPLA | 1 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Thumb Proximal (P/N 12)printed.thumb-proximal | FDMPLA | 1 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Thumb Distal (P/N 13)printed.thumb-distal | FDMPLA | 1 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Servo Frame (P/N 14)printed.servo-frame | FDMPLA | 1 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Palm Front Frame (P/N 15)printed.palm-front | FDMPLA | 1 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Palm Rear Frame (P/N 16)printed.palm-rear | FDMPLA | 1 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
| Silicone pad molds, top and bottom halves (One_Click_Print_Molds_R+L.3mf)printed.molds | FDMPLA | 2 | — | — | folder · github.comprofile: Bambu X1C, 0.4 mm nozzle, 0.2 mm layers, tree su |
Using a print service
- Download the files from the linked folders (the maker’s repo, under its licence).
- Send them with the material per part from the table above; ask for the wall and infill settings the package gives.
- Compare the quote against printing at home: filament mass is not stated.
We have no print-service partners and show no service prices.
Upstream files
File links are per part in the table above.
Hardware licence: CC-BY-NC-SA-4.0