Printables · package 0.1.0
Print AR4
Every part to print or fabricate, with its material, process and the upstream file. Print them yourself, or send the same files to a print service and ask for a quote.
- Printed parts
- 31
- Entries
- 51
- Filament (stated)
- not stated
- Printer time
- not stated
- Processes
- FDM · 31CNC · 27
- Minimum printer (stated)
- not stated in the package
Fit (stated minimum)min. bed not stated
Plates on this bed—Needs grams per part; the package has none.
By material
- PETG31 parts
- Aluminium27 parts
Printer time: not stated. 31 printed parts carry neither grams nor hours.
All entries
| Part | Process · material | Qty | h / part | g / part | Files |
|---|---|---|---|---|---|
| J1 Base Enclosure Rearprinted.j1-base-enclosure-rear | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J1 Base Enclosure Front (or the single-piece J1 Base Enclosure)printed.j1-base-enclosure-front | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 50% inf |
| J1 Base Enclosure Trayprinted.j1-base-enclosure-tray | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J1 Base Enclosure Fan Coverprinted.j1-base-enclosure-fan-cover | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J1 Base Enclosure Lidprinted.j1-enclosure-lid | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J2 Side Cover (or Upper + Lower halves for small beds)printed.j2-side-cover | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J2 Arm Cover Spacer (or Upper + Lower halves for small beds)printed.j2-arm-cover-spacer | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J5 Side Plateprinted.j5-side-plate | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J5 Side Coverprinted.j5-side-cover | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J5 Side Spacerprinted.j5-side-spacer | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J2 Side Cover Logo and J5 Side Cover Logoprinted.cover-logos | FDMPETG | 2 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J2 Motor Spacer Part 1 and Part 2printed.j2-motor-spacers | FDMPETG | 2 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 50% inf |
| J4 Spacer 4mm (3 mm and 5 mm versions provided for belt tension)printed.j4-motor-spacer | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J4 Timing Hub (must be no thicker than 15 mm; tap 8 holes M4)printed.j4-timing-hub | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 50% inf |
| J5 Bearing Post Spacerprinted.j5-bearing-post-spacer | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J5 Motor bracket (cable tie anchor)printed.j5-motor-bracket | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J1, J2 and J3 Magnet Mountsprinted.magnet-mounts | FDMPETG | 3 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| Sensor Mount 1, 2 and 3 (Hall sensors J1, J2, J3)printed.sensor-mounts | FDMPETG | 3 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J2 Bearing Coverprinted.j2-bearing-cover | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J2 Cable Holderprinted.j2-cable-holder | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J4 Limit Switch Mountprinted.j4-limit-switch-mount | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J6 Limit Switch Mountprinted.j6-limit-switch-mount | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| J6 Limit Contactprinted.j6-limit-contact | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: PETG recommended (ABS used by upstream); 15% inf |
| CF Cat5 Jacket Stripper (tool; file named CF Cat6 Jacket Stripper in the zip)printed.cat-jacket-stripper | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: Tool, holds a razor blade |
| 60t_timing_hub_pulley (optional printed replacement for the 60T XL pulley)printed.60t-timing-hub-pulley | FDMPETG | 1 | — | — | source · anninrobotics.comprofile: Optional; manual does not give settings |
| J1 Base Platestruct.j1-base-plate | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J1 Turret Housingstruct.j1-turret-housing | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J1 Spindlestruct.j1-spindle | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J1 Platform (J1 Turret Platform)struct.j1-platform | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J2 Turret Housingstruct.j2-turret-housing | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J2 Armstruct.j2-arm | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J2 Drive Spindlestruct.j2-spindle | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J2 Tension Ringstruct.j2-tension-ring | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J1 & J3 Motor Mountstruct.j1-j3-motor-mount | CNCAluminium (kit) or printed | 2 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J2 Motor Supportstruct.j2-motor-support | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J3 Bearing Cupstruct.j3-bearing-cup | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J3 Spindlestruct.j3-spindle | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J3 Spindle Retainer (file: J3 Tension Ring)struct.j3-spindle-retainer | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J4 Turret Housingstruct.j4-turret-housing | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J4 Main Shaft (cannot be printed: cut and drill 1 in OD aluminium tube to the manual drawing)struct.j4-main-shaft | CNCAluminium tube 1 in OD x 0.035 in wall, 116.3 mm | 1 | — | — | source · anninrobotics.comprofile: Kit part, or cut and drill tube per the drawing |
| J4 Motor Mount / limit armstruct.j4-motor-mount | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J5 Motor Mountstruct.j5-motor-mount | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J5 Belt Carrier (file: J5 Carrier)struct.j5-belt-carrier | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J5 Belt Carrier Clampstruct.j5-belt-carrier-clamp | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J5 Housingstruct.j5-housing | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J5 Idler Tension Blockstruct.j5-idler-tension-block | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J5 Bearing Poststruct.j5-bearing-post | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J6 Housing (35 mm)struct.j6-housing | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J6 Main Bearing Armstruct.j6-main-bearing-arm | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J6 Gripper Mount (8 mm)struct.j6-gripper-mount | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
| J6 Bearing Capstruct.j6-bearing-cap | CNCAluminium (kit) or printed | 1 | — | — | source · anninrobotics.comprofile: Aluminium kit part, or print: ABS (upstream) / P |
Using a print service
- Download the files from the linked folders (the maker’s repo, under its licence).
- Send them with the material per part from the table above; ask for the wall and infill settings the package gives.
- Compare the quote against printing at home: filament mass is not stated.
We have no print-service partners and show no service prices.
Not printable: 27 CNC parts go to a machining or cutting service.
Upstream files
File links are per part in the table above.
Hardware licence: Annin-Robotics-NC-1.1