Skip to content
humanoidrobot.build

Every way to get it

Get Berkeley Humanoid Lite

UC Berkeley Hybrid Robotics Lab · open hardware

Buy it from the maker, source the parts yourself, print or outsource the printed parts, or hire someone who has built one. Same numbers, side by side, then a helper that picks one for your budget, tools, time and experience.

L2Sim-verifiedBuild package →Printables →
Maker sale
Not sold by the maker
Parts, best region
$4,204 US
Printer time
200 h
Fully buildable
not yet
Fig 1/4RenderBerkeley Humanoid Lite studio render, three-quarter front view
Studio render of the published URDF, the model's zero pose. Geometry only; colours are the model's own materials.© Rendered by Hyperspawn from HybridRobotics/berkeley-humanoid-lite-assets (CC-BY-SA-4.0) · Hyperspawn render · source
Ship parts to
01

Side by side

Figures from the package · US prices
A

Buy from the maker

Not offered
What you getNot sold by the maker. The registry lists no maker sale for this robot.
Cost—
Time—
Tools—
Skill—
Unknowns—
No store link
B

Source the parts

37/37 priced
What you getA cart of 37 BOM lines (1,421 parts) across vendors, maker's store first.
Cost$4,2043 lines have no offer for US.
  • IN$4,204 · 37 n/a
  • US$4,204 · 3 n/a
  • EU$4,204 · 37 n/a
  • CN$4,204 · 3 n/a
Vendor price where stated, else the package list price. n/a = lines with no vendor there.
TimeAssembly time not stated14 steps without a time
ToolsFDM printer >=200x200x200 mm (Bambu X1C or Ender-3 V3 SE tested) · soldering iron · flux · hot glue gun · soldering iron with heat-insert tip · +6 more
SkillSoldering, crimping. 14 steps5 safety-critical
Unknowns
  • 3 vendors for US
  • Shipping, duties, taxes
Open the cart
C

Print it, or have it printed

30 printed
What you get30 printed parts.
Cost$53Own printer: 2.40 kg filament stated for 22/30 parts. Print service: quote from the files; we hold no service prices.
Time≈ 200 h printer time0 min stated + 200 h estimated from grams at 12 g/h.
ToolsFDM printerBed ≥ 200 × 200 × 200 mm (stated)
SkillPLA
Unknowns
  • 8 parts with no grams or hours
  • Print-service prices
Printables list
D

Hire a builder

Certified at L5
What you getSomeone who has built this robot assembles it for you, or with you.
CostQuoteParts plus labour. No builder rates are published yet.
TimeSet with the builder.
ToolsNone
SkillNone
Unknowns
  • No certified teams yet: certification needs L5, Berkeley Humanoid Lite is L2.
  • Availability near you
Crew on humanoidrobots.team
02

Which way is yours

Rules, not a model · every reason is shown
Tools you have
Time
Experience
Recommended pathquote

Hire a builder

  • ✓No tools, no skill needed.
  • !No certified teams yet (needs L5; Berkeley Humanoid Lite is L2).
Go
  1. 02Source parts, use a print serviceNeeds soldering or crimping; you have no soldering iron ticked.$4,204 + print quote
  2. 03Source parts, print at homeNeeds an FDM printer; you have none ticked.$4,257
03

Build readiness

What makes a robot fully buildable
  • ■Open hardware (CAD + BOM public)yes
  • ■Build package compiledyes
  • □BOM lines with a vendor34/37
  • ■Fabrication list5 entries
  • ■Assembly steps, each with a check14/14
  • ■Firmware describedyes

Each unchecked line is a bounty on humanoidrobots.team.

04

Honest unknowns

What this page cannot tell you
  • Lines with no vendor, by region: IN 37, US 3, EU 37, CN 3.
  • 8 printed parts have neither grams nor print time.
  • 14 assembly steps have no time estimate.
  • Resale and used units: not tracked.
  • Shipping, duties and taxes: not included anywhere on this page.